installed cam/heads/headers Need help idling
installed cam/heads/headers Need help idling I have the fast intake and TB on a 01 ls1 and the cable for the throttle has either too much slake or is too tight.
Is there a way to adjust it in the middle. The FAST TB doesn't have a notch in the middle of the two.
Please help!!!
Is there a way to adjust it in the middle. The FAST TB doesn't have a notch in the middle of the two.
Please help!!!
to much slack should just cause it to go to its set screw..... is there a set RETURN screw on the fast TB??
if it idles high I would say its too tight and wont return to its idle setting.
if it idles high I would say its too tight and wont return to its idle setting.
There is a notch for the cable to slide into on the TB bracket and there is a guess a set screw to hold it once in returns to idle. I will try messing with the screw and see what happens
