Vengeance Ported FAST 96mm Intake/Nick Williams 96mm TB Combo!!!!!!!!
04-15-2009, 08:04 PM
#26
TECH Senior Member
iTrader: (3)
Join Date: Apr 2006
Location: Western Burbs of Detroit
Posts: 6,524
Likes: 0
Received 1 Like
on
1 Post
Well I have essentially the same thing, but mine is setup for 95mm inlet, 95mm tb on a mild h/c full bolt on 11.09 to 1 compression Forged 402. The tb appears to have added 7 rwhp 17 rwtq. It was a bitch to tune though. However the results were worth it. BTW, that power was added at peak and under the curve.
04-16-2009, 07:55 PM
#27
Launching!
iTrader: (3)
Join Date: Dec 2003
Location: Jacksonville, FL
Posts: 277
Likes: 0
Received 0 Likes
on
0 Posts
Well I have essentially the same thing, but mine is setup for 95mm inlet, 95mm tb on a mild h/c full bolt on 11.09 to 1 compression Forged 402. The tb appears to have added 7 rwhp 17 rwtq. It was a bitch to tune though. However the results were worth it. BTW, that power was added at peak and under the curve.
04-24-2009, 07:28 AM
#30
TECH Senior Member
iTrader: (3)
Join Date: Apr 2006
Location: Western Burbs of Detroit
Posts: 6,524
Likes: 0
Received 1 Like
on
1 Post
i don't have a big stroker but i do have a 402 w/ron's ported fast 95mm version and a rev xtreme 95mm tb. going from ls2 90mm tb the 95 from rev picked up 7 rwhp and 17 rwtq! anyways hope this helps some. i do not have ported fast 90 numbers, that would've been ideal. i am curious what my old ported 90 setup would make on the setup.
05-04-2009, 02:54 AM
#32
On The Tree
Join Date: Aug 2008
Location: kuwait
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
nice cat...
