Another ebay headers thread
12 Second Club
iTrader: (4)
Joined: Dec 2007
Posts: 1,712
Likes: 0
From: Between Bowling Green/Owensboro
Regardless if I do have issues when I get it all in I will just drive it down to the muffler shop and have them do some hardcore bending for me.
12 Second Club
iTrader: (4)
Joined: Dec 2007
Posts: 1,712
Likes: 0
From: Between Bowling Green/Owensboro
and of course it happened right over the holiday weekend... they havent called me back lol.
12 Second Club
Joined: Jun 2009
Posts: 93
Likes: 0
Got mine in. Slipped in no modification to k-member, engine block, or even steering column was needed. I was having a hard time getting all the header bolts in and decided to do the old school warped flange trick and cut the flange in between the two middle bolts and they bolted in no sweat after that. Had an exhaust shop weld up the x pipe and flowmasters and I added cats because the car may be in an area that requires a sniffer test soon.
The headers have turned a nice golden color.
Just want to reiterate the fact that my car required ZERO modification to slip in and after cutting the flanges to match the factory manifolds they bolted up in literally minutes.
I've added quite a bit of fuel and timing now so I'm sure these things added some power. I'll know when I go to the track
The headers have turned a nice golden color.
Just want to reiterate the fact that my car required ZERO modification to slip in and after cutting the flanges to match the factory manifolds they bolted up in literally minutes.
I've added quite a bit of fuel and timing now so I'm sure these things added some power. I'll know when I go to the track
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
I'm not aloud to post the link on them am i? here is what the description is on 98-02 stainless steel transam headers
100% new in box & good quality
Made of high quality T-304 stainless steel with CNC mandrel-bent tubing
Adds an extra 6-10 horsepower and torque
O2 sensor insertion, metal gasket included
Full stainless steel High Flow Catalytic Converter / Resonator
Increase Air Flow and Performance. Super light weight
Professional installation is highly recommended
No instructions included
Exactly same as the picture
100% new in box & good quality
Made of high quality T-304 stainless steel with CNC mandrel-bent tubing
Adds an extra 6-10 horsepower and torque
O2 sensor insertion, metal gasket included
Full stainless steel High Flow Catalytic Converter / Resonator
Increase Air Flow and Performance. Super light weight
Professional installation is highly recommended
No instructions included
Exactly same as the picture
Has anybody ever found out where these sellers on ebay are getting these headers? I seen 4 sellers selling the same headers that range from 145 bucks on up. These guys must not be giving much at all for these. I wish I could find where there are getting them
I got the Ebay headers on "from Opinion Racing" and the pacesetter y, it fits but not 100%. We had to pull/hank/beat the F out of it and the catback to all fit. But i had to grind my k members down. But the worst part is.. i had to grind them with the headers on... no that was a task. For the money the ebay headers are good. Just make sure u prep the fitment before u bolt up.. so u dont have to so what i did.
I got the Ebay headers on "from Opinion Racing" and the pacesetter y, it fits but not 100%. We had to pull/hank/beat the F out of it and the catback to all fit. But i had to grind my k members down. But the worst part is.. i had to grind them with the headers on... no that was a task. For the money the ebay headers are good. Just make sure u prep the fitment before u bolt up.. so u dont have to so what i did.
Got mine from Opinion Racing as well. They go on a week from Saturday. Hope it goes good. Sarge91 did yours turn any colors after you fired them up? Also any chance on a sound clip??
Here's a sound clip of mine, with a custom 3" H-pipe and single chamber mufflers. Mine were from dptmotorsport. I think they're pretty much all the same though.
http://www.youtube.com/watch?v=bOex9OAjLeo
http://www.youtube.com/watch?v=bOex9OAjLeo
Has anyone noticed an increase in valvetrain noise due to the header primary walls possibly being thinner than other headers?
Pics of ground clearance?
Any updates on y pipes that are known to bolt in?
I can't find any ebay username with opinion racing, but it seems like most of the headers are the same. Can someone PM me with more info regarding the exact headers they bought if they had success with them.
Pics of ground clearance?
Any updates on y pipes that are known to bolt in?
I can't find any ebay username with opinion racing, but it seems like most of the headers are the same. Can someone PM me with more info regarding the exact headers they bought if they had success with them.
