Which cutout?
there was a great write up on how to run the wire and mount the switch. ill try to find it but under your passenger rear seat there is a little round rubber plug that you can run wire through and tie it into the driver side power seat power supply and mount it like this. heres some pics of mine. DMH is the best cut out imo due to warranty and opening speed.
seat before install
switch installed
Cut out from back
Cut out from side
Wiring from cutout to rubber stopper
Clearance
seat before install
switch installed
Cut out from back
Cut out from side
Wiring from cutout to rubber stopper
Clearance
Last edited by dshag; Jun 1, 2009 at 07:50 PM.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
TECH Regular
Joined: Feb 2004
Posts: 450
Likes: 0
From: Over Here and Over There
I have the QTP cutout. Going on 5 years now i think. Never skipped a beat. QTP is a sponsor unlike the other brand that does not support this site. I have had friends that thought DMH was better and when there was a problem no one ever picked up there phone or responded to emails. Really lack support after the sale. They dumped dmh and all now run QTP and they love it. You wont be disappointed.
I have a QTP, I've had it for 18+ mons. I open and close it at least 4-6 times a day. And the only thing that has failed was the fuse....
That being said I would probably buy a DMH for the warranty...I bough the QTP because I got a smoking deal
That being said I would probably buy a DMH for the warranty...I bough the QTP because I got a smoking deal
On The Tree
Joined: Mar 2009
Posts: 112
Likes: 0
From: Redmond
For a dual set up we would recommend our Oval Low Profile Electric Cutout.
Here is a picture of them on a Charger.
Info and pricing on the duals is located here
http://www.quicktimeperformance.com/OVAL/index.php
If anyone has any questions feel free to give us a call.
Here is a picture of them on a Charger.
Info and pricing on the duals is located here
http://www.quicktimeperformance.com/OVAL/index.php
If anyone has any questions feel free to give us a call.
DMH is the way to go .... DMH has a 4 year warranty compared to 1 year for QTP .... I know a few guys with the QTP cutout that have had numerous problems with them .... I have been using the DMH for four years now with no problems ... call Dave (great guy) at DMH and he will take good care of you .. 
PS I put the switch in the ash tray.
PS I put the switch in the ash tray.
