Removing Headers FROM THE TOP?!?!
Yes it can be done. I had jet hot coated headers and I used a cherry picker to attach to the motor then unbolt the motor mounts to move the motor a little from side to side. Some headers can come right out without unbolting the motor mounts. It will take a little work but it can be done. I perfer to do it that way exspecially if you are taking the heads off. I did mine with them still on.
think that would be much more work than going from on bottom..
get someone you know with a lift (friend of someone that works for a place with a lift) to let you use for 30 minutes or so.. wont take any time at all..
or you can just try jacking it up real high..
get someone you know with a lift (friend of someone that works for a place with a lift) to let you use for 30 minutes or so.. wont take any time at all..
or you can just try jacking it up real high..
Putting the SLP's on from the bottom was one of the biggest PITA's of my life. I was hoping that it would be rather easy to slide them out from the top. I was hoping there would be an easier alternative to going through the bottom.
Lemons:
Easier said than done. The car is taken appart. I'd need a tow truck to move it.
Lemons:
Easier said than done. The car is taken appart. I'd need a tow truck to move it.
Trending Topics
Putting the SLP's on from the bottom was one of the biggest PITA's of my life. I was hoping that it would be rather easy to slide them out from the top. I was hoping there would be an easier alternative to going through the bottom.
Lemons:
Easier said than done. The car is taken appart. I'd need a tow truck to move it.
Lemons:
Easier said than done. The car is taken appart. I'd need a tow truck to move it.
guess you will be from the top then.. goo luck man, let us know how it turns out.. LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'
Brett Foote
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
i like my gauges. I need to order the LC-1 controller for my wide band.
I went with Water Temp, Fuel Pressure and Wideband
