Did the EGR Removal earlier, and had a question.

1st Pic is what's removed, 2nd Pic....What do I with what's left in the car. I'm assuming this is a vacume line of some sort. Right now, engine side this part is just hanging. Is there more to take off / Block? I didn't see it noted in this writeup

Car is a 2001 Pontiac Formula.

 

It seems like the car in this post didn't have the "AIR Shutoff Valve."

https://ls1tech.com/forums/generatio...oval-pics.html

 

looks like a diff system to me. my car has the style from the other post.

 

the link is for 98-early-00. yours is the later style. but u do cap off the line that went to the shut off valve.

 

Thanks goldmecham,

I figured that you had to cap it off. I saw another post where they removed that solenoid, and finally capped behind the vacume line behind the intake. I believe that is what I'm going to do. Just gotta wait for the blockoff plates to get in now.

 

i just cut the tubes off mine and i have tons of thin metal sheets so i traced and cut it out and used the part i cut off the tube to hold the sheet down not a single leak in 20k miles.