Question about TSP TD's..
Thread Starter
On The Tree
Joined: Nov 2007
Posts: 101
Likes: 0
From: Collierville, TN
Question about TSP TD's.. Anyone know how long the sweet thunders or dynomax bullets are that are included with the TSP TD's ?
I was thinking maybe 18" but Im not entirely sure.
I was thinking maybe 18" but Im not entirely sure.
there are different sizes you can buy. i got the 18" when i had my tds and they make a 24" and 30"
http://www.sweet-thunder.com/chamber....html#aluminum
http://www.sweet-thunder.com/chamber....html#aluminum
Trending Topics
I just got my TSP duals in just waiting to install them. And I just measured them there about 24 inchs and 28 inchs from the tip of the turn down to the end of the muffler.
And I also have the sweet thunder mufflers.
And I also have the sweet thunder mufflers.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
Thread Starter
On The Tree
Joined: Nov 2007
Posts: 101
Likes: 0
From: Collierville, TN
I measured the section of piping that replaced the mufflers, without the turndown included, and its roughly 18". I already ordered the 18" sweet thunders, and Im going to just chop the tips off the straight-pipe and weld them on the new mufflers. I cant wait to get them in. I got some stainless band clamps too, that oughta help with some of my exhaust leak issues.
