Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

fast 96mm

Thread Tools
 
Search this Thread
 
Old 09-29-2009, 11:26 AM
  #1  
Teching In
Thread Starter
iTrader: (2)
 
Ls1_hawk's Avatar
 
Join Date: Nov 2008
Location: green cove springs FL
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts

Default fast 96mm

Hi guys I'm new to the lsx I just did a swap in my 99 firebird so now it has an LM7 bored to ls1 specs ms3 cam on a 113 lsa hand ported 5.3 heads ls7 lifters pacesetter LTs true duels arp rod bolts and its a M6 so will the fast96mm work with my set up o an my car is a dd
Thanks guys
Old 09-29-2009, 12:15 PM
  #2  
TECH Junkie
iTrader: (6)
 
MonmouthCtyLS7's Avatar
 
Join Date: Jan 2005
Location: Rotonda West Florida
Posts: 3,955
Received 30 Likes on 27 Posts

Default

Why wouldnt it work? Thats a normal Gen.4 LS intake manifold.
Old 09-29-2009, 03:02 PM
  #3  
Teching In
Thread Starter
iTrader: (2)
 
Ls1_hawk's Avatar
 
Join Date: Nov 2008
Location: green cove springs FL
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts

Default

Well from what I could find it was made for big cube motors and aggressive heads an cam I'm trying to see if my heads and cam is that aggressive to keep up with that intake
Old 09-30-2009, 06:39 AM
  #4  
TECH Junkie
iTrader: (6)
 
MonmouthCtyLS7's Avatar
 
Join Date: Jan 2005
Location: Rotonda West Florida
Posts: 3,955
Received 30 Likes on 27 Posts

Default

You should be fine
Old 09-30-2009, 08:57 AM
  #5  
Teching In
Thread Starter
iTrader: (2)
 
Ls1_hawk's Avatar
 
Join Date: Nov 2008
Location: green cove springs FL
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts

Default

Thanks




All times are GMT -5. The time now is 12:51 AM.