Sleepy383SS

Is that a Dr. Gas X-pipe?

Pro Stock John

iTrader: (34)

Kooks x-pipe.

I have a custom HD driveshaft.

Big Mike

iTrader: (4)

That exhaust looks awesome John! I need to get around to doing a setup like that on my car.

Is it just my eyes or does your torque arm look bent John?

Pro Stock John

iTrader: (34)

It's your eyes, the torque arm has no miles on it.

2002WS6_MN6

John, did they have to bang in your floor boards to get those muffler's to fit? If not those Pitbulls look like a nice alternative to bullets..

ONGRNGO

Hey john this is kindove off the subject but what DS LOOP is that I am going to run duals next year but need a Loop.

Dan

Pro Stock John

iTrader: (34)

No clearancing of the floorboards.

It's a modified Metco DS loop. Had to be modified for the duals.

robertbartsch

....that tranny looks like a turbohydromatic 400...I used to rebuild these in the 70's....now i push paper instead...

robertbartsch

..Nice set-up; unfortunately, these would not be legal in NY...

Jake99SS

I'd like to do a setup similar to this. Do the mufflers/resonators control the sound more when they're further away from the headers? Originally I was going to put some Race Magnums on the collectors. I'd probably dump it right after the axle instead of before.

BTL FED

iTrader: (9)

Where did you purchase that, I have never seen one like that before?

Pro Stock John

iTrader: (34)

Jake, I haven't really driven the car around but setups like this don't resonant typically, but my car will resonate a bit since it has no carpeting in it right now.

FAST LS1

iTrader: (2)

Does having the turndowns aimed toward eachother reduce drone/noise John? My main concern when I do true duals is the drone in 6th gear on the intersate because I still want a decently loud exhuast.

Pro Stock John

iTrader: (34)

They are turned in but right now my car is a rattletrap without carpeting.