Flowtechs
I bought the Flow Techs for my first car. The flanges are thin and they bent as I tightened the header bolts. I didn't have any problems with them as far as leaks or fitment.
I bought Pacesetters for the next car and the quality is better. The flanges are thicker and I like the slip fit on the collectors vs the 3 bolt flange that the Flow Techs used.
If your looking into budget headers, go with the Pacesetters over the Flows.
I bought Pacesetters for the next car and the quality is better. The flanges are thicker and I like the slip fit on the collectors vs the 3 bolt flange that the Flow Techs used.
If your looking into budget headers, go with the Pacesetters over the Flows.
I bought the Flow Techs for my first car. The flanges are thin and they bent as I tightened the header bolts. I didn't have any problems with them as far as leaks or fitment.
I bought Pacesetters for the next car and the quality is better. The flanges are thicker and I like the slip fit on the collectors vs the 3 bolt flange that the Flow Techs used.
If your looking into budget headers, go with the Pacesetters over the Flows.
I bought Pacesetters for the next car and the quality is better. The flanges are thicker and I like the slip fit on the collectors vs the 3 bolt flange that the Flow Techs used.
If your looking into budget headers, go with the Pacesetters over the Flows.
Trending Topics
been happy with my flowtechs.
ceramic coating on the collectors peeled and rusted...but it took 4+ yrs. primaries are still looking good.
one flange was slightly warped, but tightened down they were fine.
at the time, they were the most cost effective...they came out right about the same time as pacesetters.
i WILL say this....the Ypipe fit perfect!!! perfect clearance with the frame (and it was one piece!), built for great ground clearance.
ceramic coating on the collectors peeled and rusted...but it took 4+ yrs. primaries are still looking good.
one flange was slightly warped, but tightened down they were fine.
at the time, they were the most cost effective...they came out right about the same time as pacesetters.
i WILL say this....the Ypipe fit perfect!!! perfect clearance with the frame (and it was one piece!), built for great ground clearance.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
