What MAF for a FAST 90/90 480RWHP
#21
On The Tree
iTrader: (25)
Join Date: Jan 2007
Location: I-20
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
I cant help you with that. Im not a tuner at all, thats why im going to a maf cause I cant retune every time the weather changes. But I dont have an ses light. Im sure someone in the pcm section can help you with that
#23
TECH Resident
Thread Starter
Hey Nevernuff, I don't have a SES light, but if you plug in to the OBD, there is a MAF error code.
I will check into that to see if there is a way to turn that off.
I will check into that to see if there is a way to turn that off.
#24
TECH Resident
Thread Starter
I saw a picture of that MAF on a GM Tech web site. It looks like the LS7 type sensor. That looks like a good way to go, with next to no restriction. Did you tune the MAF tables?
#26
LS1TECH & Trucks Sponsor
iTrader: (34)
Neither will plug right into your harness, you will need a wiring adapter that we sell from Katech or Caspers
__________________
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
#28
TECH Resident
Thread Starter
Does anyone have a part number for a LS3/Ls7 style of MAF sensor. I may just buy one of those and plug it into a 4" tube after the air cleaner.
#29
LS1Tech Premium Sponsor
iTrader: (4)
We offer 85mm lids to match the GM or SLP maf, or we can get you setup with the TSP 100mm maf & a matching air lid.
__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
#34
TECH Resident
Thread Starter
I bought the 08 Corvette MAF and I'm going to make a 3.5" ID tube for it that will fit onto my air cleaner. That will be 89mm ID. It may take a week to get this built, and another week to find a dry day to drive in Oregon. I will keep you posted on how it works. I have been running a SD tune for over a year now. The car runs really good with the SD tune, so the MAF should be be easy, right.
#36
TECH Resident
Thread Starter
When I first tried the SD tune, my VE was so far off I could hardly drive the car. With a 233/239 cam, ported heads, and a Fast90
intake, it was pretty far from the factory VE tables. Now after scanning, and reporgramming 30 times, it runs really good idle mid and WOT. It will be interesting to see how long it will take to get this new MAF tuned.
intake, it was pretty far from the factory VE tables. Now after scanning, and reporgramming 30 times, it runs really good idle mid and WOT. It will be interesting to see how long it will take to get this new MAF tuned.
#37
11 Second Club
iTrader: (1)
Join Date: Mar 2007
Location: Canonsburg, PA
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
Any progress with the LS7 MAF? I'm getting ready to do the same thing with a 3.5" pipe and LS7 maf. The pipe replaces the stock c5 maf perfectly.
I have a similar setup to you. 236/240 cam. fast92. ls2 tb. The MAF is the last thing to figure out...
I have a similar setup to you. 236/240 cam. fast92. ls2 tb. The MAF is the last thing to figure out...
#39
LS1TECH & Trucks Sponsor
iTrader: (34)
The truck MAF is screened. It is the same as the standard C5, LS2 GTO etc. The Z06 MAF does not have a screen and is not the same
__________________
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice