oil dipstick

Reply Subscribe

Thread Tools

Search this Thread

Dec 27, 2003 | 03:31 PM

waterbug1999

Thread Starter

10 Second Club

iTrader: (3)

Joined: Jun 2003

Posts: 4,282

Likes: 1

From: Minnesota

oil dipstick

after you take the bolt out from the side does it just pull out?

Dec 27, 2003 | 04:30 PM

Stalker WS6

On The Tree

iTrader: (2)

Joined: Mar 2002

Posts: 190

Likes: 0

From: MS / NC

Yes...it should just pull out.

Dec 27, 2003 | 04:35 PM

y2k_ta

'Bird Director

iTrader: (80)

Joined: Dec 2001

Posts: 12,829

Likes: 30

From: Central Indiana Honors: 4th grade spelling bee contestant

Yes, it just pulls out. You might have to get under the car and gently pry on the end so it will pop out. When reinstalling, be sure to check it under the car again to make sure it is popped back in.

Dec 27, 2003 | 04:37 PM

Mike K.

TECH Junkie

Joined: Dec 2001

Posts: 3,242

Likes: 0

From: Lakeland, FL

it slides right up and out. It comes out pretty easy so be careful not to bend it or else it will be a bitch to put back in.

Dec 27, 2003 | 05:37 PM

1STGEN68-2000SS

TECH Apprentice

Joined: Dec 2003

Posts: 342

Likes: 0

From: Houston

Quote:

Originally Posted by waterbug1999

after you take the bolt out from the side does it just pull out?

Yes it slides out and when you are installing it back in be sure to put in back of the wires as it was when you removed it. Also make sure the o ring is lubricated and still on it.
alan

Dec 27, 2003 | 08:03 PM

ss rally red

TECH Veteran

iTrader: (8)

Joined: Jan 2002

Posts: 4,298

Likes: 0

From: Destin FL

Yes undue the 15 mm bolt and out it comes, anyone that has done headers has had to have done this.It is easier to re-install if you can get under the car to align the tube back in

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last