need V6 help
Thread Starter
11 Second Club
iTrader: (10)
Joined: Feb 2006
Posts: 2,215
Likes: 2
From: Sterling Heights, MI
need V6 help i had to help a buddy remove the upper intake mani on his 97 V6 and we broke the Map sensor and the hose that connects to the MAP sensor then back to the fuel regulator and are wondering where to get a new one and what exactly we should be asking for
thanks
thanks
Im not sure if a parts store like pep boys or advance would have something like that, but what your looking for is the hard vacuum line from the MAP to the FPR.
Might be cheaper to figure out the diameter of the connections to see if they're both the same (im thinkin they should be 1/4") and just get some 1/4" vacuum line from a parts store for a couple bucks and go that route.
Call around and ask.
Might be cheaper to figure out the diameter of the connections to see if they're both the same (im thinkin they should be 1/4") and just get some 1/4" vacuum line from a parts store for a couple bucks and go that route.
Call around and ask.
