What is this part?
Thread Starter
TECH Enthusiast
iTrader: (4)
Joined: Apr 2005
Posts: 644
Likes: 0
From: Salinas/ San Diego, CA
What is this part? Hey guys, can anyone answer my description of this part. The part bolts under mid car and helps hold the y pipe up? it spans from one side of the tranny tunnel to the other. i am looking to buy one of these. thanks in advance!
It's the exhaust doomaflotchy! I think I have one in my shop that I took off my car. Haven't looked at it for awhile so I'm not sure what kind of shape it is in. But if you are interested, I'll pull it out, inspect it and snap a pic to send to you if you want! I'm just a few hours north of you and might even be coming down to the Huntington Beach area soon. PM me if you are interested!
Trending Topics
Good advise conan. 01, they work with these: http://www.umiperformance.com/catalo...roducts_id=197
to tie everything together. You can do one or the other but with both you'll get the best of both worlds.
to tie everything together. You can do one or the other but with both you'll get the best of both worlds.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Launching!
Joined: Jan 2010
Posts: 281
Likes: 0
From: Winter Haven, Florida
Good advise conan. 01, they work with these: http://www.umiperformance.com/catalo...roducts_id=197
to tie everything together. You can do one or the other but with both you'll get the best of both worlds.
to tie everything together. You can do one or the other but with both you'll get the best of both worlds.
01BLKSS - No luck finding my tunnel brace (that sounds WAY better!!) tonight. I'll look again when I get off work tomorrow!! Sorry for getting your hopes up but I'm not giving up yet!
Thread Starter
TECH Enthusiast
iTrader: (4)
Joined: Apr 2005
Posts: 644
Likes: 0
From: Salinas/ San Diego, CA
Hell, I wish I were in Texas, I would send my old tunnel brace for the cost of shipping and a Mountain Dew. . . MANY MANY people remove theres and never reinstall. Should be easy to locate.
Thread Starter
TECH Enthusiast
iTrader: (4)
Joined: Apr 2005
Posts: 644
Likes: 0
From: Salinas/ San Diego, CA
any one have an old tunnel brace for an Manual car for sale? Im needing one soon as im putting a ypipe setup back on. ( this piece supports the ypipe correct?)
its supposed to connect the two sides of the body flexing together. im sure your mountain dew can could do a better job at it tho... Im another one who just took it off...
Thread Starter
TECH Enthusiast
iTrader: (4)
Joined: Apr 2005
Posts: 644
Likes: 0
From: Salinas/ San Diego, CA
The reason I was looking for one is that I got rid of my true duals and going back to a ypipe setup. I was thinking it supports the ypipe at the tunnel. Anyone know where all the ypipe mounting points are? im trying to tuck the custom ypipe up as much as possible to utilize ground clearance.
thanks!
thanks!
Thread Starter
TECH Enthusiast
iTrader: (4)
Joined: Apr 2005
Posts: 644
Likes: 0
From: Salinas/ San Diego, CA
