Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

HELP!!! What does this hose connect to?

Thread Tools
 
Search this Thread
 
Old Jun 13, 2010 | 10:16 AM
  #1  
MikeG's Avatar
Thread Starter
11 Second Club
iTrader: (33)
 
Joined: Mar 2004
Posts: 1,672
Likes: 0
From: Tampa, FL
Default HELP!!! What does this hose connect to?

Hey guys I'm finishing up a cam install and have a hose coming off the radiator left over and can't figure out where it hooks up...help!

Its the one that hooks up to the radiator with that copper line in the second pic
Attached Thumbnails HELP!!! What does this hose connect to?-hose-001.jpg   HELP!!! What does this hose connect to?-hose-002.jpg  
Reply
Old Jun 13, 2010 | 10:22 AM
  #2  
99427camaro's Avatar
On The Tree
iTrader: (1)
 
Joined: Mar 2009
Posts: 144
Likes: 0
From: wausau
Default

that goes under the throttle body to the cross over pipe
Reply
Old Jun 13, 2010 | 10:29 AM
  #3  
MikeG's Avatar
Thread Starter
11 Second Club
iTrader: (33)
 
Joined: Mar 2004
Posts: 1,672
Likes: 0
From: Tampa, FL
Default

Nope, that one is already hooked up. The hard rusty metal line points downward and there is no way it could reach up to the TB

Last edited by MikeG; Jun 13, 2010 at 10:39 AM.
Reply
Old Jun 13, 2010 | 10:46 AM
  #4  
99427camaro's Avatar
On The Tree
iTrader: (1)
 
Joined: Mar 2009
Posts: 144
Likes: 0
From: wausau
Default

ow **** you sure that is not a trans cooler line should hook up under you crank pully
Reply
Old Jun 13, 2010 | 10:54 AM
  #5  
MikeG's Avatar
Thread Starter
11 Second Club
iTrader: (33)
 
Joined: Mar 2004
Posts: 1,672
Likes: 0
From: Tampa, FL
Default

Well I have an aftermarket tranny cooler. I was thinking that's what it could be...The lines are all hooked up still I didn't disconnect them. Now I get it. that hose is bypassed by my B&M cooler.
Reply
Old Jun 13, 2010 | 11:05 AM
  #6  
99427camaro's Avatar
On The Tree
iTrader: (1)
 
Joined: Mar 2009
Posts: 144
Likes: 0
From: wausau
Default

even if you have an after market cooler you should run your trans fluid through you radiator in case you stuck in traffic your trans will still get cooled by your coolant
Reply
Old Jun 13, 2010 | 01:40 PM
  #7  
Arc00TA's Avatar
TECH Fanatic
iTrader: (17)
 
Joined: Apr 2007
Posts: 1,729
Likes: 1
From: The 'Nard
Default

Originally Posted by 99427camaro
even if you have an after market cooler you should run your trans fluid through you radiator in case you stuck in traffic your trans will still get cooled by your coolant
Although it never works like that. The trans fluid just gets hotter and hotter. Anyways, that the upper trans cooler line. If you're using an aftermarket one I would just plug that so it doesn't get crap in there.
Reply




All times are GMT -5. The time now is 12:18 PM.