Shaner vs Bauer vs Home Ported
#21
Seriously!! Free, you pay postage back to you, and whatever barrel sanding discs I go through, not many though, about 2 or 3 bucks worth I guess. Carbide bits do most of the work. It takes me about 20 minutes. I did about 15 so far, everyone loved them. One guy dynoed before and after and got 7.8hp. Well, me email is tasleeper@aol.com free is free in my book if your wondering. Victor
#23
unstable Vic--thanks for the offer! I will probably take you up on the offer at a later time if it still stands then b/c I cannot due w/o my tb right now. It is offers like that that make the board great. I am sure you do a great job, and hopefully I will find out.
ba96ta...try www.ls1howto.com or search around here.
ba96ta...try www.ls1howto.com or search around here.
#34
I had an S2, sent it to Jantzer to be powdercoated/reported. My TB looked MUCH better after getting it back from Jantzer. I can't give you flow numbers, but Jantzer did a lot of things to the TB that Shaner did not do at the time (about 1.5 years ago)