Just installed gmmg BUT
Just installed gmmg BUT the tips hang down too low. they dont even hang straight, they hang at a downward angle. what did i do wrong and how do i fix this? thanx. oh yea and the sound is awesome btw!!!!
One thing you can do is if the left side hangs lower, get you some washers and shim down the bracket the hangs down on the right side. Right where the over the axle pipe attaches/hangs.
Mike call gmmg. They need to know.
Mike call gmmg. They need to know.
TECH Addict
Joined: Dec 2001
Posts: 2,907
Likes: 1
From: Bergen County, NJ
Slide the over the axle pipe down further onto the I pipe. The exaust pivots on the hangers so if you slide that down, the tips go up. The exhaust is made to have a slight downward angle at the tips, but very slight.
As DaddySS said, your main adjustment point is the I pipe to catback connection. The more you slide the catback over the I pipe the higher it will bring the tips. If you have already torqued the crusher clamp down, you may have to go to an exhaust shop and have it removed/adjusted.
Also, as mentioned, you can "play" with the hangers and get some variance in height as well. Hope this helps you.
Ron@GMMG
Also, as mentioned, you can "play" with the hangers and get some variance in height as well. Hope this helps you.
Ron@GMMG
Last edited by Cammin BeaSSt; Jan 27, 2004 at 07:24 PM.
