HELP: what lid and MAF???
thanks alot, its def a good option for me. i spke with jason at TSP and he said the 100mm MAF would be great aslong as my tuner is fine with it, its tricky to tune from what he said. still wna look into/speek with my tuner about speed density
of course its great lol, they need to sell products.. for the money you can't beat the 85mm GM maf.. if you step up to a 100mm maf be prepared to get a lid that fits correctly AND clears the hood.. some modification is probably going to be needed.
You must have $$$ burning a hole in your pocket. The parts that you want to buy will make very small gains and cause you tuning headaches. SD tuning is for cars with much more radical setups than yours. The easiest and most reliable is a good tune when you do your heads. Buy your self a good set of heads and you will be in the 450 rwhp range with your stock maf. The stock maf will be fine up to 500 rwhp. Ask me how I know....cause thats where I am...
Last edited by slt200mph; Nov 4, 2010 at 06:15 PM.
You must have $$$ burning a hole in your pocket. The parts that you want to buy will make very little gains and cause your tuning headaches. Buy your self a good set of heads and you will be in the 450 rwhp range with your stock maf. The stock maf will be fine up to 500 rwhp. Ask me how I know....cause thats where I am...
i have all parts, all i need to buy if i dont go speed density is a maf and 98+mm lid. i dont have money burning a hole in my pocket thats why i dont have heads. if i can make 430 wheel say(at veryyyyyy best) im not dropping close to 2g for 20hp. with not wanting to spend money on heads i wana buy the little thing for around or under 500bux to get those few hp cause with cam intake only, every horse is worth it to me.
PS A good set of heads makes more than 20 hp. You do not have to spend 2K for a good set of heads.
ms4s make power all over, cam and header only cars make over well 400,i mean even ms3 cars make 415
finally deciding to listen to the majority and go with the slp lid i have, and get the z06 85mm with the adapter plug. only place i can find the set is ws6store.com for 220, anyone know where i could mayb find it somewhere else? price if good but idk if somplace sells em with coupler...and ive lookd alll over! thanks everyone
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo finally deciding to listen to the majority and go with the slp lid i have, and get the z06 85mm with the adapter plug. only place i can find the set is ws6store.com for 220, anyone know where i could mayb find it somewhere else? price if good but idk if somplace sells em with coupler...and ive lookd alll over! thanks everyone
look on Ebay.. I bought mine for $35 shipped used but guaranteed in working condition. I then had to buy the adapter plug which was about $25-30 I believe from AutoWiringSolutions.. also on ebay.. can't help you with the lid to maf adapter cause I stepped up my game and went with the 98mm air lid
mine fit just fine with the hood closed all the way.. but I forgot the motor moves around when driving and after I installed it and drove for a bit it had a nice scratch on it.. easily fixable with sanding and buffer though (i got the clear one) What I'm going to do to remedy the situation is trim the underneath of the air lid support base, you know, the piece that has the (4) 10mm bolts and attaches to the top of the radiator, that way the air lid will sit lower.
awesome thanks! post a pic when its complete! i havent looked into them much but what site did you get the clear ftp from?
I got mine from Speed Inc but I don't think FTP is making it anymore.. so if you wanted it you'd have to go to the classifieds or call around maybe. I actually plan to airbrush mine some time, not the whole thing, like a design where you can still see through the lid at the same time. I think it will turn out pretty sweet.
yea that'll look good. Ive run into a HUGE dilemma, 85mm GM maf with adapter plug new(cause i dont do ebay/or have paypal acct.) is 220.00. the TSP 100mm with adapter is 249.99. not a big price jump. def guna go with ftp 98mm and car will be dyno tuned. i am emailing my tuner after this post to see what he says. your input will help too.(if their is anymore!)
I'm sure you could find a much better deal on here for an 85mm maf that you could send a money order for etc seen as you don't have a PayPal acct. Here's one I just searched for and found and is still available. https://ls1tech.com/forums/parts-cla...-85mm-maf.html
I've seen the adapter harness for sale in the classifieds also.
I've seen the adapter harness for sale in the classifieds also.
look on Ebay.. I bought mine for $35 shipped used but guaranteed in working condition. I then had to buy the adapter plug which was about $25-30 I believe from AutoWiringSolutions.. also on ebay.. can't help you with the lid to maf adapter cause I stepped up my game and went with the 98mm air lid
hey i finally got a 85mm Z06 MAF from my tuner for 30 bux! Now i want on autowiringsolutions.com and couldnt find the 3 pin to 5 pin maf adapter, what other webesites carry this thing!
is this it??????? Caspers LS1 MAF to 3800 MAF Pigtail
http://speed-eng.com/store/caspers-l...l-p-10298.html
http://speed-eng.com/store/caspers-l...l-p-10298.html
well was at the sponsor CSP today and we tested stock lid, descreened stock MAF, to a SLP lid and z06 85mm, and gained 20hp/18ftlbs of torque. on basically stock car with a EPS cheater cam.