SLP LS6 EGR Fitting?
Thread Starter
Registered User
Joined: Jan 2011
Posts: 36
Likes: 0
SLP LS6 EGR Fitting? I will be disconnecting the brass ring on my LS6 intake when I put a stock exhaust back on my car. I know these things can leak after taking them on and off. Does anyone know if someone makes a replacement fitting or sells a better EGR connection anymore? I heard that Lingenfelter did at one time, but doesn't any longer. I'm sure quite a few people on here have had leaks, so what have you done..aside from an EGR delete?
try this place http://www.mcmaster.com
this is where i got my brass fitting to plug up the egr on my slp ls6 manifold.
this is where i got my brass fitting to plug up the egr on my slp ls6 manifold.
Thread Starter
Registered User
Joined: Jan 2011
Posts: 36
Likes: 0
I was afraid of that. I'm taking it off because I'm using a different EGR bracket from a 2000 car, so I can use their better exhaust manifolds, instead of the 98's.
Thread Starter
Registered User
Joined: Jan 2011
Posts: 36
Likes: 0
try this place http://www.mcmaster.com
this is where i got my brass fitting to plug up the egr on my slp ls6 manifold.
this is where i got my brass fitting to plug up the egr on my slp ls6 manifold.
