LS1/6 Block Measurements
#1
Teching In
Thread Starter
iTrader: (2)
Join Date: Jan 2011
Location: Dallas, TX
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
LS1/6 Block Measurements
I have been digging all over the internet for some detailed measurements of an Gen III block. Not much luck so I got a junk block and measured it up. You can get the details here.
http://sprint27.com/?p=76
The picture below is the bottom view of the motor. It looks like someone had a very bad day with the funny gas. Either that or a bionic beaver chewed on it. Hope it helps someone else with their future LS project.
Kevin
http://sprint27.com/?p=76
The picture below is the bottom view of the motor. It looks like someone had a very bad day with the funny gas. Either that or a bionic beaver chewed on it. Hope it helps someone else with their future LS project.
Kevin