slowblackformula

hey guys the part of the pcv setup on my 98 formula that is located on the drivers side rear is broken i was wondering if anyone knows what that part is called i cannot find it, it has a hose that connects to it for the pcv system thanks

LS1121

iTrader: (17)

do you have a picture of the part?

slowblackformula

it is located in the driver side valve cover rear

sjsingle1

iTrader: (1)

that hose is part of the WHOLE pcv hose system......new is like 100$......or you can cobble some hoses togther.....or get a LS6 valley cover......i vote for the LS6 VC

slowblackformula

not the hose its where the hose connects to the valve cover i need that fitting, it goes ino the valve cover

LS1121

iTrader: (17)

I might be looking for the same thing that is why I asked you for a picture. I am going to have an answer to my question when I get to work because we have many fitting that I can use. I'm not sure what it is you want. I am changing from perimiter bolt valve covers to center bolt valve covers. My valve cover has a rubber grommet in it with a hole in the middle. i have replaced my entire system and I pm'd you the link. When I get my fix you will be able to look at the link because i will update the link with the Information for the 99-02 driver side valve cover.

slowblackformula

yeah its a metal piece that has a bent tube on it for the pcv hose to connect too

LS1121

iTrader: (17)

found it and edited my post you can see the picture there.