TSP true duals..Which muffler?
They will sell them with no muffler... They reduce the price then order your one chambers off eBay or summit etc..
Most people like those and bullets, until they have a one chamber.
Most people like those and bullets, until they have a one chamber.
I didn't have money to buy mufflers. So I made my own for $10 bucks.
I have never heard sweet thunders in person, but i have heard bullets and 1 chamber flowmaster. I prefer the 1 chamber flowmaster. Deeper nicer tone. IMO.
I have never heard sweet thunders in person, but i have heard bullets and 1 chamber flowmaster. I prefer the 1 chamber flowmaster. Deeper nicer tone. IMO.
TECH Enthusiast
Joined: Feb 2007
Posts: 552
Likes: 0
From: chicago
Ive had the sweet thunders. Sounded excellent bolt-on only but after the H/C/I I put Hooker aerochambers on there and it sounded real deep, pretty loud too. Ive since then gone to Y setup but If I could run the TD's with Aerochambers with (no rubbing/bottoming out/no room issues) that's what I'd be running.
I will say that the VAST majority (90+%) that praise bullets/thunders/spirals/etc so much and say its the only way to go/sound so amazing/etc etc have never heard a 1 chamber in person.
There is no comparison, 1 chamber blows any of the others out of the water.
To me, its like comparing a cutout to a nice exhaust. Just because something is loud doesn't mean it sounds good.
You know you can get knock off 1 chambers (EXACT same thing as Flowmasters since they lost the patent) for around 35-45$ a piece depending on where you buy.
I know this is an old thread but do the 1 chambers have clearance issues mounted on the TSP true duals?
Are these the correct 1 chambers? http://www.flowmastermufflers.com/sh...e=&orig=843015
Are these the correct 1 chambers? http://www.flowmastermufflers.com/sh...e=&orig=843015
Last edited by Bramlok; Nov 5, 2012 at 05:01 PM.
I know this is an old thread but do the 1 chambers have clearance issues mounted on the TSP true duals?
Are these the correct 1 chambers? http://www.flowmastermufflers.com/sh...e=&orig=843015
Are these the correct 1 chambers? http://www.flowmastermufflers.com/sh...e=&orig=843015
The sound is still loud with a cam. Much better sound though. You will like. At first they are pretty quiet but after a few days mine got "broke in" lol
im gonna be doing a custom true dual exhaust again on my car since the first true dual I had on it sucked! this time ill be doing it over the axle using an x pipe and the SLP powerflo exhaust.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Look at my threads. I just put dynomax single chambers on my texas speed duals. I used offset offset. Had to get to pieces of 3"pipe from parts store to extend mufflers about 6"to reach the tsp hangers. Fit perfect. Cut the hangers where they are welded to the bullets and weld them to the new ones.
The sound is still loud with a cam. Much better sound though. You will like. At first they are pretty quiet but after a few days mine got "broke in" lol
The sound is still loud with a cam. Much better sound though. You will like. At first they are pretty quiet but after a few days mine got "broke in" lol
TECH Regular
Joined: Dec 2011
Posts: 423
Likes: 1
From: Wildomar, CA
