Paul Bell

iTrader: (9)

I installed a new Magnaflow exhaust. I'm very happy with the sound. Never loud, it has a nice growl when I get into it.

I never liked dual tips so I got the singles. They look terrible. They sit too deep under the bumper and don't match.

I have a set of three inch oval slash tips that I'd like to use. I called Magnafow and asked if they have plain (non-chromed) tail pipes in stainless.

The guy flatly said they don't sell tail pipes separately and the call was pretty much over. I must say I was very disappointed with this.

My question: Does anybody make tail pipes to replace mine in 3 inch stainless as just pipes without the larger chromed section?

01ssreda4

iTrader: (96)

Preformed tailpipes that extend to the bumper? Probably not. Why can't you cut yours, and weld some stainless pipe to extend them?

nc2000ls1

iTrader: (1)

go to your local exhaust shop they should be able to fix you up pretty easily

Paul Bell

iTrader: (9)

Thanks guys I know I can do those things.

I was hoping to find the pipes in the right size, shape, bend and material with the correct hangers on them.

My thinking was that somebody else knew a Magnaflow part number.

z28camaross2

iTrader: (1)

If not I know slp makes exhaust elbows so if your local shop can't help try them

z28camaross2

iTrader: (1)

I also hate my tips they have never been even from date one now they look freakin cross eyed ! One is up and one is down too much , so I purchased slp dual dual tips off a member here and I'm having them put on with my longtubes this or next week

Paul Bell

iTrader: (9)

Cool thanks guys. Didn't think of SLP. going there now...

DOG-TWO

I just put that catback on my car with those tail pipes and they do not line up very well. It took lots of adjustment and what not to make them seem just okay.

Paul Bell

iTrader: (9)

I don't think it's a Magnaflow problem. It's just that the tails hold up the muffler and it's so hard to get just right & perfect. There's no way to really adjust one thing without it affecting another thing.

DOG-TWO

I know what you mean. My left tailpipe goes up and doesn't come out very far and my right one is perfect.

Paul Bell

iTrader: (9)

Mine are the opposite. and they both sit too far inwards, the right one more than the left.

As the tips are part of the pipes, there's no adjustment of the tips. One reason I want to put separate tips on the pipes.

01ssreda4

iTrader: (96)

As a tidbit, I was able to locate a catback here on the forums. Somebody wanted the muffler, and I wanted the tailpipes/tips, so the guy split it up for us. Gave about $120 and they were still wrapped in plastic. I thought that was a good deal. Maybe you could find something like that.

sjsingle1

iTrader: (1)

pics!!!!

omarrakeen

iTrader: (2)

did you get the whole catback or just the muffler? i saw those tail pipes on ebay for 100 3 days ago? check it out! and are on lts and ory? if so please take a good quality sound clip if you can going with this muffler soon.

Paul Bell

iTrader: (9)

No, I installed the full cat-back system.

I don't want the muffler-back tailpipes/tips. I want muffler-back tail PIPES without the larger chromed sections.

omarrakeen

iTrader: (2)

ah sry missed that. how about going custom? should cost much, just 2 90 degrees bends?

Jasons50

iTrader: (1)

Sounds like what you want will probally be custom made. Just research your local exhaust shop to find a good one.

pewter2002

iTrader: (4)

When I bought my Magnaflow cb I got the quad tip figuring that a tip change in the future would be easier even though it was extra money. Also, I didn't care for the regular version at all so it HAD to be quad tip... Sure enough, I ended up buying other type of tips for the look I want. I feel the quad tip version gives you the flexibility to change tips easily just by unclamp/clamp- you pay for it though...

Guitar

iTrader: (9)

You could go with the Borla tips like I have on my car, sexy!

mjs1012

iTrader: (36)

love the sound, hate the fitment