Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

Which pulley puller for power steering?

Old Oct 17, 2011 | 04:03 PM
  #1  
tording99Z28's Avatar
Thread Starter
10 Second Club
iTrader: (3)
 
Joined: Nov 2007
Posts: 1,033
Likes: 2
From: Hampton, VA
Default Which pulley puller for power steering?

Which pulley puller do you guys use to get the stock pulley off the power steering? I went to advance auto and they have two, they have one that has two pieces that you put around the center hub on the pulley with a nut thing and as you turn the nut it pulls the pulley off and then they have a 2 jaw typical puller. I have tried the jaw one and I can't get it to grab the hub on both sides so the pulley keeps coming off the pulley. Which one have you guys had success with?
Reply
Old Oct 17, 2011 | 07:45 PM
  #2  
S10xGN's Avatar
TECH Junkie
iTrader: (11)
 
Joined: Jul 2005
Posts: 3,782
Likes: 7
From: Port Neches, TX
Default

Originally Posted by tording99Z28
Which pulley puller do you guys use to get the stock pulley off the power steering? I went to advance auto and they have two, they have one that has two pieces that you put around the center hub on the pulley with a nut thing and as you turn the nut it pulls the pulley off and then they have a 2 jaw typical puller. I have tried the jaw one and I can't get it to grab the hub on both sides so the pulley keeps coming off the pulley. Which one have you guys had success with?
^^^ This one.
Reply
Old Oct 18, 2011 | 03:37 PM
  #3  
BimmerLSX's Avatar
On The Tree
iTrader: (33)
 
Joined: Oct 2011
Posts: 101
Likes: 0
From: Upstate N.Y
Default

Agree with S10XGN, 2 piece one for pulley hub.
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:25 AM.