SS Muffler replacement
Looking at ordering them now. Would Chrome or Ceramic be better? Now i'm trying to decide whether or not to add more suspension mods or to go ahead with the exhaust....
It's really up to you chrome will turn blue over time and may get small surface rust. Mine have a small amount of rust and blueing after 2 yrs but are in good shape overall. Ceramic will never blue but may eventually peel/rust I like the chrome for the money
Thats what I'm thinking for $379 it would be well worth it, even if you have to replace them every 4 or 5 years. I just have to find someone to tune the car afterwards.
Well, I just ordered the Chrome BBK longtubes and Y pipe. They should be here soon. For $398 dollars shipped, I don't think they can be beat. Now to just order the O2 extensions, gaskets, and to line up a day to get the car tuned. Is there anything else that I will need?
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Well, I just ordered the Chrome BBK longtubes and Y pipe. They should be here soon. For $398 dollars shipped, I don't think they can be beat. Now to just order the O2 extensions, gaskets, and to line up a day to get the car tuned. Is there anything else that I will need?
Well, I just ordered the Chrome BBK longtubes and Y pipe. They should be here soon. For $398 dollars shipped, I don't think they can be beat. Now to just order the O2 extensions, gaskets, and to line up a day to get the car tuned. Is there anything else that I will need?
Motor mounts, plugs, and wires, will be a definite. Are the o2 extensions known not to work that great? Just curious about the vette o2 sensors. How big of a piece of pipe did you need? From what I have read most times it can be covered with a band clamp, but I just want to make sure.
My headers just shipped from a BBK location in Florida, and I just ordered all of the other things I need from WS6store. I wound up getting GM gaskets, plugs, wires, motor mounts, tranny mount, o2 extensions, stage 8 locking header bolts, and a 2.5" bump stop exhaust hanger they sell that stops the y pipe from ever hitting the floor board. I think that should be everything I need for the install.
My headers just shipped from a BBK location in Florida, and I just ordered all of the other things I need from WS6store. I wound up getting GM gaskets, plugs, wires, motor mounts, tranny mount, o2 extensions, stage 8 locking header bolts, and a 2.5" bump stop exhaust hanger they sell that stops the y pipe from ever hitting the floor board. I think that should be everything I need for the install.
Forget the magnaflow. Either get LT's, and keep stock exhaust, or go the cheaper route and get an electric cutout, and choose how loud you want to be, and when you want to be loud. That's what I would do.
It would be great if i don't wind up needing the bump stop. I can send it back and get my $40 bucks back. But I may go ahead and use it just to make sure everything fits as well as possible.
Well guys, the shipping was way faster than I expected from both companies. The headers are on track to be here tomorrow with all of the stuff from WS6 store following on Wednesday. I have an install/ tune appointment set up for Thursday so hopefully everything will be done by thursday evening.
Well guys, the shipping was way faster than I expected from both companies. The headers are on track to be here tomorrow with all of the stuff from WS6 store following on Wednesday. I have an install/ tune appointment set up for Thursday so hopefully everything will be done by thursday evening.
