TBSS Intake?
#22
TECH Fanatic
iTrader: (7)
Well you dont have too. But thats part of the upgrade is it allows you use a 92mm tb . The TBSS is 4 bolt so you need a adapter plate 3 bolt to 4 bolt to run the 78 mm tb. Running the small tb would hurt some of max potential its designed for but still be a gain. If DBW you will also a Dr X link to covert the signal . If your dbc you'll need a cable bracket mount .
#24
FormerVendor
iTrader: (1)
Join Date: Nov 2008
Location: Santa Ana, CA. USA
Posts: 2,157
Likes: 0
Received 17 Likes
on
17 Posts
TBSS 90mm DBW/DBC Conversion Kit
HI ALL, I too fit the TBSS intake with a 90mm Air Door.
I manufacture a DBW/DCB conversion kit for the GM 90mm Air Door, Square Motor Flange, USA LS-2 Style.
There is an example fitted to a LS-X 400 test engine, the current engine on my Bench Dyno.
The kit cost is $135.00 AND includes a new TPS/TPS connector.
Lance
I manufacture a DBW/DCB conversion kit for the GM 90mm Air Door, Square Motor Flange, USA LS-2 Style.
There is an example fitted to a LS-X 400 test engine, the current engine on my Bench Dyno.
The kit cost is $135.00 AND includes a new TPS/TPS connector.
Lance
#26
TECH Senior Member
iTrader: (96)
Join Date: Aug 2007
Location: Turnin' Wrenches Infractions: 005
Posts: 24,241
Likes: 0
Received 81 Likes
on
72 Posts
Is this really the factory part? 2006 - 08 tbss intake manifold. Super cheap if you ask me.
http://www.ebay.com/itm/Engine-Intak...dWs-vk&vxp=mtr
http://www.ebay.com/itm/Engine-Intak...dWs-vk&vxp=mtr