FAST 90 Bellow/Coupler
Thread Starter
TECH Resident
iTrader: (60)
Joined: Dec 2006
Posts: 849
Likes: 0
From: Jacksonville, Florida
FAST 90 Bellow/Coupler Need to know what size bellow/coupler I need for a FAST 90 intake to go to a 85mm SLP MAF. My SLP smooth bellow will not fit the FAST 90 intake obviously.
just need to do a MAF delete tune and run a straight 4" hose from lid to TB.
http://intakehoses.com/Merchant2/mer...ory_Code=CACH5
with something like that.
http://intakehoses.com/Merchant2/mer...ory_Code=CACH5
with something like that.
10 Second Club
Joined: Jan 2010
Posts: 2,317
Likes: 20
From: Hurley, VA
You could probably take a heat gun and heat your bellow up enough to stretch over the TB. I almost got it over my 102 but ended up just going to home depot and buying a piece of fernco. Its worked like a charm.
Got mine from intakehoses.com too but it has a 22* angle to it 4" ID. It's a little loose over the MAF but when you clamp it down it seals good. You have to do some trimming for a perfect fit.
