LM1 to MagnaMouth Install, Pics
#21
12 Second Club
Join Date: Dec 2008
Location: Richmond,VA
Posts: 319
Likes: 0
Received 0 Likes
on
0 Posts
i was planning on doing something similar to my loudmouth, mine is not factory so i can just take my muffler off, i have the LM2 right now but its still to loud and raspy. i have a stock y pipe and no headers. Im thinking magnaflow has a muffler that can just simply repalce my LM2 one without cutting and welding, if anyone knows let me know, its that or all new exhaust setup
#23
i was planning on doing something similar to my loudmouth, mine is not factory so i can just take my muffler off, i have the LM2 right now but its still to loud and raspy. i have a stock y pipe and no headers. Im thinking magnaflow has a muffler that can just simply repalce my LM2 one without cutting and welding, if anyone knows let me know, its that or all new exhaust setup
#24
i was planning on doing something similar to my loudmouth, mine is not factory so i can just take my muffler off, i have the LM2 right now but its still to loud and raspy. i have a stock y pipe and no headers. Im thinking magnaflow has a muffler that can just simply repalce my LM2 one without cutting and welding, if anyone knows let me know, its that or all new exhaust setup
#28
#30
Yeah its right around 2500 rpms. I actually think it sounds cool hahah. I can see how its not for everyone though
#31
TECH Fanatic
iTrader: (3)
Join Date: Aug 2004
Location: holding down the couch
Posts: 1,458
Received 0 Likes
on
0 Posts
Some people can deal with it, I made it about a month or so before replacing the resonator. And still wasn't happy until I replaced the LM all together. Check back in a few weeks
#33
12 Second Club
Join Date: Dec 2008
Location: Richmond,VA
Posts: 319
Likes: 0
Received 0 Likes
on
0 Posts
It could be raspy from my cats being gutted, its not to raspy or nothing, im just picky. I just think its to loud for highway driving, it starts to get to loud that my wife has to wear earplugs to ride in it.
#34
It still shouldnt be loud. I guess my def of loud is cammed / open long tubes. Maybe thats why I think everything else is tame.
#35
Staging Lane
iTrader: (2)
Join Date: Jan 2012
Location: Missouri
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
Get a sound clip made yet? I am on the border of ordering a muffler to replace mine, and ls1sounds doesn't have any clips of a magnamouth. I tried playing the borlamouth as a comparison but those wouldn't play either!
#39
Fail on the sound-clip.
I spent my time home replacing both both upper control arms (ball joints included), lower ball joints, and tie rid ends on the Escalade, including 4 new tires and alignment.
Then went to take the Camaro in for an alignment, and get told my outer tie rods and upper ball joints were shot.
Sorry guys. On the rig for the next 2 weeks as well.
The only thing I can say, is where the LM1 is just LOUD, the MagnaMouth is still loud"ish" but has tone. The bass is the best part.
I spent my time home replacing both both upper control arms (ball joints included), lower ball joints, and tie rid ends on the Escalade, including 4 new tires and alignment.
Then went to take the Camaro in for an alignment, and get told my outer tie rods and upper ball joints were shot.
Sorry guys. On the rig for the next 2 weeks as well.
The only thing I can say, is where the LM1 is just LOUD, the MagnaMouth is still loud"ish" but has tone. The bass is the best part.
#40
TECH Fanatic
iTrader: (39)
i have the same muffler. i have a ory cutout with the magnaflow muffler dumped before the axle here is with the cutout open
http://www.youtube.com/watch?v=ZiiclhLIFEc
http://www.youtube.com/watch?v=ZiiclhLIFEc