fast 102 problem
#1
Launching!
Thread Starter
iTrader: (24)
Join Date: Nov 2008
Location: N/A
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I just got my fast 102 manifold in today and was looking at it and three on the runners have gaps between them and the lover shell. Is this normal? should i be concerned about problems and tuning my new motor?
Last edited by D01ss; 04-26-2012 at 10:54 PM.
#5
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
i don't know if thats a normal gap or not, but it seals up with an o ring there. pull the upper shell off and inspect the runners fitment.. it's easy to assemble/disassemble.
if not, tony mamo should be able to tell from those pictures. he's spent countless hours starring at those runners..
if not, tony mamo should be able to tell from those pictures. he's spent countless hours starring at those runners..
#6
Launching!
Thread Starter
iTrader: (24)
Join Date: Nov 2008
Location: N/A
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Iv been thinking about sending it out to tony for some porting so I guess if it needs some work no better person to do it then him. I'm just trying to figure out if it's bad enough to call fast but I'll taker it apart tomorrow and try to reseat the runners before I call.
#7
TECH Apprentice
iTrader: (16)
Join Date: Jun 2009
Location: Miami, FL
Posts: 337
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
some times they come misaligned from FAST. What you need to do is separate the lower shell from the upper one and try to set the runners straight so they can match the port, they wont be 100% perfect unless you get a porting done to it, but you shouldn't have that big of a gap. here are a few pics of how mine came from fast, i also had the same thing happen to me until i got it ported..like i said try setting them straight as best as you can and you'll be good go.