Header issues
Thread Starter
Registered User
Joined: May 2012
Posts: 4
Likes: 0
Header issues So I just recently installed pace setter long tubes and a full exhaust and cancelled out the cats and the rear o2s but didn't have a place to hook back up the egr system is there a way to by pass it or do I have to drill a new place to put the egr tubes???
Search !egr & !air threads on how to go about removing those systems.
You didn't mention what year the car was, so it may or may not have EGR.
2001-2002 did not, only AIR.
You may have cracked a plug or have a loose wire on the pop thing.
After removing those systems, you will also have to have the codes tuned out to eliminate any SES lights.
You didn't mention what year the car was, so it may or may not have EGR.
2001-2002 did not, only AIR.
You may have cracked a plug or have a loose wire on the pop thing.
After removing those systems, you will also have to have the codes tuned out to eliminate any SES lights.
Thread Starter
Registered User
Joined: May 2012
Posts: 4
Likes: 0
It's an 02. I checked all the spark plugs and made sure all the wires were on. I have 2 hoses that run around to the back of the intake that bolted onto the stock manifolds that are just pushing air out of them
