ZDER

iTrader: (3)

Okay someone really needs to explain this to me... I took apart my FAST78 to port it all and in the meantime the old seal went for a poop. So i ordered a new one off ebay and its a legit FAST product the product number is 146005 original box and everything. Now the confusing part... I got to put the gasket in and it only runs along the perimeter of the intake not over the runners... Cause i know your suppose to go around cut then go overtop. But i simply do not have enough! I measured out to do the runners and even if i ordered another one it wouldnt cover it all!! Id need to order 2 more ! I dont know if i got chinced on the gasket or im doing somethig wrong. Please someone help cause i really dont feel like paying 60$ for 3 sets of the same gasket. I attached a picture to explain.

Thanks Giancarlo

ZDER

iTrader: (3)

Any suggestions or thoughts appreciated... Thanks everyone

3rdGenLS

iTrader: (2)

This is what I purchased, when I did my FAST 78mm intake manifold. It came with enough to do the whole intake, and it only cost $24.99.

http://www.texas-speed.com/p-2417-fa...nt-gasket.aspx

ohioz

iTrader: (9)

Looks like you got the one for the 102 intake.

ZDER

iTrader: (3)

Okay ill call them and see what they say i was going to buy that but i found it cheaper... Justwant to know u filled everything with it cause i ran out just doing the perimeter of it ....

Blk98Vert

iTrader: (2)

You bought the wrong part

ZDER

iTrader: (3)

Lol thanks guys i appreciate your help. I called FAST aswell to see whats going on and the first time the guy said ur going to have to buy another one of the first one which didnt make sense. Then i called again and the person said that i infact ordered the wrong part ... 146005 is for the FAST102 and 54022 is for the FAST78/90/92 so if anyone is wondering thats the answer! Texas Speed had the right part btw!