Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

Need help chosing fast intake

Old Feb 8, 2013 | 11:46 AM
  #1  
1320Chicken's Avatar
Thread Starter
10 Second Club
iTrader: (4)
 
Joined: Dec 2012
Posts: 350
Likes: 0
From: Winchester, VA
Default Need help chosing fast intake

I'm in the middle of my winter upgrades and I have started kicking around the idea of going from my LS6 and ported tb to a fast 90 or 92 setup. For the same price as a 92 I have found the 102 but this is an afterthought and I don't want to take money away from what I'm doing to get fuel rails for the 102. If I can get about 500 out of my current intake and tb I will pursue this a little harder.

So enough bs. Does anyone have input for me or have a link that will help me decide?

Mods
Stock bottom end
224r Texas speed cam
Ported and milled 241s (with thinner gaskets should be ~11:1)
LS6 manifold
Ported stck tb
Lt headers
Magnaflow with cutout
Truck maf (85mm I think)
Lid
Ftra
Fernco hose mod
No emissions
Wet nitrous (either 100 shot or 150. Tested system last season but shitty track wouldn't let me really put it to use, so I'm not sure yet what I'll be spraying)
Reply
Old Feb 8, 2013 | 12:20 PM
  #2  
mpatton's Avatar
TECH Apprentice
 
Joined: Sep 2010
Posts: 322
Likes: 0
From: Missouri
Default

Fast 92 would work just fine IMO. Or just hold on to your money make some passes on the bottle and see if you could utilize that money else where if you needed. Ls6 is a pretty Good manifold.
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 06:14 AM.