advice on a carbed setup
advice on a carbed setup hey everyone, currently building a carbed ls1 that will go into a 79 vette, motor was built fully stock only had a z06 cam in it, and originaly i set it up for EFI but now im going to make it carb. anyone review my choices below and make suggestions on how well these parts will work together? not looking to make crazy ammounts of power but a bump from stock would be nice.
edlebrock performer intake for ls1s
edlebrock rollin thunder camshaft
.510"/.510" lift
300*/300* adv duration
1500-6500 rpm range
edlebrock performer carb
800cfm
stock heads and everything else stock except for usual valvetrain upgrades when doing a bigger cam then stock.
edlebrock performer intake for ls1s
edlebrock rollin thunder camshaft
.510"/.510" lift
300*/300* adv duration
1500-6500 rpm range
edlebrock performer carb
800cfm
stock heads and everything else stock except for usual valvetrain upgrades when doing a bigger cam then stock.
