Paul Bell

iTrader: (9)

Thanks Sean!

What's your charge to whack them fittings?

I don't think the TSP catted Y-pipe is stainless. I won't do any exhaust work that's not stainless steel.

Can you advise who's got a SS Y that'll fit your headers?

ULTIMATEORANGESS

iTrader: (4)

anything made in china worries me.


i hope you dont have any problems.

Speed Engineering

iTrader: (35)

Probably only 20 bucks, but the problem is they wouldn't be polished like the headers. So they might not look as clean as most would want. Were considering knocking the price down a bit, just to get a bunch off the shelf so we can order a new batch with different options. We just weren't to sure how fast they would sell.

I don't believe the Catted TSP Y-Pipe is stainless either.

Sean

Speed Engineering

iTrader: (35)

Was talking it over with the partner. We ended up dropping the prices considerably for you guys. If you have any further questions just let me know. Not sure how far out our race version will be, but we will do our best.

Thank you
Sean

BAD2theBONE

Man, I am in the market for some TSP LT 1 7/8 headers... but these are pretty tempting! At the least some good info to be learned here though! Just might have to change my mind to a set of Hooker stainless LT's... we owe China enough money as it is!

redbird555

iTrader: (14)

1.3 trillion and counting^^^ lol If I was on a budget and wanted stainless I'd look into these no doubt. I live my arhs though quality is anazing

Speed Engineering

iTrader: (35)

It amazes me how China can make everything so cheap, and the quality is not bad for the price. My partner and I were saying its pretty sad when we can't even get the material/bends here for the price that these cost.

We build hot rod/sandrail/& turbo headers in house for local customers, and our minum cost is like 800.00-1500.00. We don't even bother competing in the LS market. Pretty sad.

Sean

67c10ls1

What is the ID of the tubing? Is it a true 1-3/4" header?

redbird555

iTrader: (14)

Headers are all measured on the od of the tubing so these should be no different 1-3/4 will be to the outside of the tubes

Speed Engineering

iTrader: (35)

Redbird is correct.

Thanks..
Sean

Jamescassy

iTrader: (3)

I want some now for my 00 z28 with y pipe how much I have credit card ready ? Please message me ! How much and will you include cutting off those as well !

Speed Engineering

iTrader: (35)

Sent PM.

Thanks
Sean

wildtoy

Sean...PM sent thanx

chadroosa

iTrader: (14)

just ordered a y-pipe.. hope it works out nice...thanks!!

Zlow28

iTrader: (11)

OH Man! i really wanted to buy ss 1 7/8 longtubes, but your price is really holding me back! How much would you guys charge to cover up the egr on your headers?

PM if you want. Thanks.

demonspeed

iTrader: (7)

I would also be interested in a race version with bungs in the correct location. I'd also be interested in just the headers (meaning no gaskets, clamps, etc.).

I was *this* close to buying those $182 eBay headers, but something just held me back... Perhaps it's because I am to buy yours!

Speed Engineering

iTrader: (35)

Thank you for the orders guys. We have sold approx 12 sets, all seem to be good from what we have heard. We will just be selling them as is for now. We will be offering a race version, but were still probably 3-4 months out on them. No plans on the 1 7/8" yet.

Thanks
Sean

73CamaroLT

iTrader: (8)

In for reviews....

01ssreda4

iTrader: (96)

Can't hate on honesty. Besides I would rather buy from "car guys" then some no name eBay seller.

Flubyux2

With the o2 bungs in the wrong place, do they need extensions for the wiring?

Also, what kind of mid section could work with these to do true duals?