Every engine builder should have one of these
#42
Thank you for your business! PM me you paypal email and I will look it up.
Thank you,
Christian
__________________
Don't forget to check out our products at www.saccitycorvette.com
If you like our products, tell others! If not, tell us!
Don't forget to check out our products at www.saccitycorvette.com
If you like our products, tell others! If not, tell us!
#45
TECH Senior Member
iTrader: (39)
When I put my engine back to stock I didn't have this tool. I thought I could do it without it, fast forward about 4k miles and oil pouring out of the rear main. So, I got to do the job again. I should have bought the tool in the first place and saved myself an evenings worth of work. I got really lucky and somehow I didn't get a drop of oil on the clutch. The repair could have been way more costly.
#46
That sucks big time LilJay! I hate do overs!
We no longer sell the OP tool because we recommend pulling the pump cover and double checking the clearances because of possible pump manufacturing irregularities. Understandably, because you should check the clearance anyway, why use the tool. For that reason we believe sales where down and not worth manufacturing.
Thanks
Christian
We no longer sell the OP tool because we recommend pulling the pump cover and double checking the clearances because of possible pump manufacturing irregularities. Understandably, because you should check the clearance anyway, why use the tool. For that reason we believe sales where down and not worth manufacturing.
Thanks
Christian
__________________
Don't forget to check out our products at www.saccitycorvette.com
If you like our products, tell others! If not, tell us!
Don't forget to check out our products at www.saccitycorvette.com
If you like our products, tell others! If not, tell us!
#47
TECH Veteran
iTrader: (19)
I ordered a set. I bet will be great for people like me. It is more straight forward to align the cover when the engine is on a stand out in the open. When the engine is in the engine bay and you can't even get a good angle to see it, tight quarters -- yea, I don't want anything to go wrong. Can't wait to try them out.
#48
Thank you for your business 2002 Z28, we really appreciate it!
Christian
Christian
__________________
Don't forget to check out our products at www.saccitycorvette.com
If you like our products, tell others! If not, tell us!
Don't forget to check out our products at www.saccitycorvette.com
If you like our products, tell others! If not, tell us!
#49
If your doing the Rear Main don't forget to install one of our Precision Billet Barbells/Oil Diverter while you in there. It keeps unfiltered oil out and improves oil flow! Also check out our oother Oil System Improvement Products!
http://www.saccitycorvette.com/Billet-BarBell.html
http://www.saccitycorvette.com/Billet-BarBell.html
__________________
Don't forget to check out our products at www.saccitycorvette.com
If you like our products, tell others! If not, tell us!
Don't forget to check out our products at www.saccitycorvette.com
If you like our products, tell others! If not, tell us!
Last edited by saccitycorvette; 11-18-2017 at 03:10 AM.
#51
Christian
__________________
Don't forget to check out our products at www.saccitycorvette.com
If you like our products, tell others! If not, tell us!
Don't forget to check out our products at www.saccitycorvette.com
If you like our products, tell others! If not, tell us!
#52
We have the AlignIt tools in stock when you need them.
http://www.saccitycorvette.com/AlignItTools.html
http://www.saccitycorvette.com/AlignItTools.html
__________________
Don't forget to check out our products at www.saccitycorvette.com
If you like our products, tell others! If not, tell us!
Don't forget to check out our products at www.saccitycorvette.com
If you like our products, tell others! If not, tell us!
#53
Hi all!
If you're doing an engine build or cam swap, these tools will help prevent premature seal wear and leaks.
https://www.saccitycorvette.com/AlignItTools.html
Also, while doing that build or rear main seal, its a good time to install our Billet Barbell to help keep unfiltered oil out of your bearings and lifters.
Check out our Billet Oil System Improvement Parts.
https://www.saccitycorvette.com/OilS...provement.html
Thank you,
Christian
If you're doing an engine build or cam swap, these tools will help prevent premature seal wear and leaks.
https://www.saccitycorvette.com/AlignItTools.html
Also, while doing that build or rear main seal, its a good time to install our Billet Barbell to help keep unfiltered oil out of your bearings and lifters.
Check out our Billet Oil System Improvement Parts.
https://www.saccitycorvette.com/OilS...provement.html
Thank you,
Christian
__________________
Don't forget to check out our products at www.saccitycorvette.com
If you like our products, tell others! If not, tell us!
Don't forget to check out our products at www.saccitycorvette.com
If you like our products, tell others! If not, tell us!
#54
We hope everyone is doing well and staying safe during this crazy time of the virus.
Just wanted to let you know, while we are practicing the virus safety precautions, we still have our same day shipping of our products.
Stay safe and let’s get through this!
Christian
SacCityCorvette
Just wanted to let you know, while we are practicing the virus safety precautions, we still have our same day shipping of our products.
Stay safe and let’s get through this!
Christian
SacCityCorvette
__________________
Don't forget to check out our products at www.saccitycorvette.com
If you like our products, tell others! If not, tell us!
Don't forget to check out our products at www.saccitycorvette.com
If you like our products, tell others! If not, tell us!
The following users liked this post:
G Atsma (04-23-2020)