Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories

Sponsored by:

Intake hoses

Reply Subscribe

Search this Thread

Old

Jun 14, 2013 | 02:16 AM

#1

Thread Starter

On The Tree

iTrader: (10)

Joined: Jan 2012

Posts: 107

Likes: 0

From: Columbus, Ohio

Default

Intake hoses

I was browsing intakehoses.com and was wondering what angle hoses are you guys using? In my case I will be running a 100 MM Texas speed MAF to a 102 MM TB. I'm thinking maybe a 22 degree bend may work but am also considering a 45 degree bend.

Any input is appreciated.

Thanks

Old

Jun 14, 2013 | 02:27 AM

#2

TECH Senior Member

iTrader: (71)

Joined: Jul 2007

Posts: 11,088

Likes: 2

From: Winchester, TN

Default

I'm running a straight 6" but I'm SD.

Old

Jun 14, 2013 | 06:13 AM

#3

12 Second Club

iTrader: (26)

Joined: Nov 2005

Posts: 688

Likes: 2

From: Keller, TX

Default

I am Speed Density as well (no MAF) and I bought a 15 degree bend. We'll see if that works or not.

CHad

Old

Jun 14, 2013 | 01:00 PM

#4

10 Second Club

iTrader: (16)

Joined: Jan 2012

Posts: 1,213

Likes: 15

From: Mississippi

Default

Same as lemons, I'm running their 4" x 6" straight coupler but I'm sd as well

Old

Jun 14, 2013 | 02:50 PM

#5

TECH Senior Member

iTrader: (35)

Joined: Nov 2007

Posts: 9,705

Likes: 12

From: C. V., Kalifornia

Default

Check the angle at the back of the MAFS(or lid) when mounted then at throttle body mouth,. It'll probably be in the 15*-22* range, 45* will be too much.

Reply Subscribe

First
Prev
1 / 1
Next
Last

All times are GMT -5. The time now is 06:58 PM.