Single fuel line setup with reg at the rear???
Thread Starter
TECH Apprentice
Joined: May 2013
Posts: 329
Likes: 9
Single fuel line setup with reg at the rear??? I read that some Corvettes had a single fuel line setup with the regulator located right near to the tank to flow unused fuel back into the tank.
Can anybody please give me any more info and if possible if anybody has any pictures of the regulator setup that would be great.
Can anybody please give me any more info and if possible if anybody has any pictures of the regulator setup that would be great.
On The Tree
Joined: Jul 2013
Posts: 114
Likes: 1
Get a Corvette Fuel Filter/Regulator and it has Input/ Output and Return. You can get all the adaptors off ebay.
http://www.ebay.com/itm/Wix-33737-Fuel-Filter-/130945921181?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3ACorvette&hash=item1e7cfc309d&vxp=mtr
Then order 3 of these Russell 640860 Fuel Line Adapter AN
I have mine 2' from tank and hold 58 psi constant with 502 rwhp. Easy and simple setup
http://www.ebay.com/itm/Wix-33737-Fuel-Filter-/130945921181?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3ACorvette&hash=item1e7cfc309d&vxp=mtr
Then order 3 of these Russell 640860 Fuel Line Adapter AN
I have mine 2' from tank and hold 58 psi constant with 502 rwhp. Easy and simple setup
On The Tree
Joined: Jul 2013
Posts: 114
Likes: 1
I would use over 700 rwhp but Im gonna run it with twin 255 walbros in tank and I have 6an lines I think. Its been a while since I ran my fuel system. Its hold 58 psi at the rail at 7200 rpm with my 402 no problem just make sure you get the wix filter/reg.
Thread Starter
TECH Apprentice
Joined: May 2013
Posts: 329
Likes: 9
Many thanks for the great reply. Very useful.
