Fast 102 and trap speeds
Thread Starter
Launching!
iTrader: (6)
Joined: Sep 2008
Posts: 257
Likes: 0
From: Cape Girardeau Missouri
Fast 102 and trap speeds Not sure where the best place to post this but here goes....
People that switched to a fast 102 intake have you noticed any trap speed differences? I dont give a crap about any dyno numbers, i can find that stuff all day long. I would like to have a thread where people posted before and after ET's or ET differences at least.
Things that i would like to know though to compare apples to apples better.
1. Whats your car weigh roughly?
2. What cubic inch?
3. Anything else that might be important
People that switched to a fast 102 intake have you noticed any trap speed differences? I dont give a crap about any dyno numbers, i can find that stuff all day long. I would like to have a thread where people posted before and after ET's or ET differences at least.
Things that i would like to know though to compare apples to apples better.
1. Whats your car weigh roughly?
2. What cubic inch?
3. Anything else that might be important
Thread Starter
Launching!
iTrader: (6)
Joined: Sep 2008
Posts: 257
Likes: 0
From: Cape Girardeau Missouri
Ill go first i guess even though i wont have my 102 track passes till Sunday!
1. Full weight car
2. 347ci, 5200 converter, afr225's @59cc, 236/242 .615/.615 111LSA, 9" w. 4.11
3. Best trap was 92.5 MPH and 1.59 60' with the LS6 intake and stock TB in the 1/8 mile
Stay tuned.... 102 intake and 92mm TB are on and waiting. Going to retune at the track also, i doubt we make a pass with the old tune, but i guess i can for *****.
1. Full weight car
2. 347ci, 5200 converter, afr225's @59cc, 236/242 .615/.615 111LSA, 9" w. 4.11
3. Best trap was 92.5 MPH and 1.59 60' with the LS6 intake and stock TB in the 1/8 mile
Stay tuned.... 102 intake and 92mm TB are on and waiting. Going to retune at the track also, i doubt we make a pass with the old tune, but i guess i can for *****.
Thread Starter
Launching!
iTrader: (6)
Joined: Sep 2008
Posts: 257
Likes: 0
From: Cape Girardeau Missouri
yes, just follow thread on the link below. have it posted in 2 different places.
https://ls1tech.com/forums/drag-raci...ap-speeds.html
https://ls1tech.com/forums/drag-raci...ap-speeds.html
