Whose exhaust is this?
Thread Starter
TECH Addict
iTrader: (13)
Joined: Jan 2004
Posts: 2,900
Likes: 1
From: USN, Haze Grey and Underway
Whose exhaust is this? Can you tell me how hard it would be to modify the floorboard like this. Would it be very noticable to the rear passengers when they have a seat?
Thanks..
Thanks..
Thread Starter
TECH Addict
iTrader: (13)
Joined: Jan 2004
Posts: 2,900
Likes: 1
From: USN, Haze Grey and Underway
Alright.. the reason I asked the question whose exhaust this was is because I'd like to know how to do this:
I'm gonna be running those mufflers and I'd like for mine to tuck that nicely also..
How much work is involved with a floorboard modification like that?
I'm gonna be running those mufflers and I'd like for mine to tuck that nicely also..
How much work is involved with a floorboard modification like that?
OMG! If you want it to look like that it is simple take a Hammer and go to beating! I would think that you could come up with another exhaust set up that did not require you to do damage like that to your car. Even if it is a race car only I would figuer out something else to do to get duals. You could cut the whole section out and place smooth sheet metal over the area and remove the back seat area real nice. Just a few suggestions. If you choose the first method you could start with a floor jack in those areas and then come back with the Big Hammer. Good luck on what ever you are trying to do.
Trending Topics
TECH Enthusiast
Joined: Jul 2002
Posts: 618
Likes: 0
From: Pensacola, FL
Wow, dude really mashed his floor pans.
O/T: Why don't folks seem to notice all those lines right there on the driver's side. It can't be good having exhaust pipe/muffler right under the fuel and brake lines heating things up.
Just an observation.
Dave
O/T: Why don't folks seem to notice all those lines right there on the driver's side. It can't be good having exhaust pipe/muffler right under the fuel and brake lines heating things up.
Just an observation.
Dave
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Thread Starter
TECH Addict
iTrader: (13)
Joined: Jan 2004
Posts: 2,900
Likes: 1
From: USN, Haze Grey and Underway
This is how those mufflers look without damaging the floorboard..
By the way, this is Pro Stock John's old setup.. I'm just worried that this may be a little too low? Has anyone seen a Camaro with dual muffler mounted right where the tips exit?
How would that look since the Camaro doesn't have the rear valence like the Trans Am?
By the way, this is Pro Stock John's old setup.. I'm just worried that this may be a little too low? Has anyone seen a Camaro with dual muffler mounted right where the tips exit?
How would that look since the Camaro doesn't have the rear valence like the Trans Am?
Thought I fixed that. I'll look into it.
Its a series of pictures of the boom tube on my SS. No banging or hammering involved and plenty of clearence for most people. I am pretty damn low though so I do have to avoid any place with speed bumps.
Its a series of pictures of the boom tube on my SS. No banging or hammering involved and plenty of clearence for most people. I am pretty damn low though so I do have to avoid any place with speed bumps.
Thread Starter
TECH Addict
iTrader: (13)
Joined: Jan 2004
Posts: 2,900
Likes: 1
From: USN, Haze Grey and Underway
Originally Posted by NataSS Inc
Why beat it to death when you can do this?
http://www.imagestation.com/album/?id=4287496113
http://www.imagestation.com/album/?id=4287496113
1) I'm sure I can't afford it...
2) I'm tryin to quiet the car down a bit from my current setup..
3) I think I'd die of Carbon Monoxide poisioning in traffic..
Nah.. just kidding.. that's a nice setup, but not the one for me..
Originally Posted by Z28Venom
3) I think I'd die of Carbon Monoxide poisioning in traffic..
Its real bad when I have a little race gas in it as well. They just sit thier and wonder why thier eyes are burning so bad. 
Thread Starter
TECH Addict
iTrader: (13)
Joined: Jan 2004
Posts: 2,900
Likes: 1
From: USN, Haze Grey and Underway
Originally Posted by NataSS Inc
LOL, it isnt bad at all. Its just the poor people in the other lane on the passenger side Its real bad when I have a little race gas in it as well. They just sit thier and wonder why thier eyes are burning so bad.
Its real bad when I have a little race gas in it as well. They just sit thier and wonder why thier eyes are burning so bad. I know what you mean.. My car just by not running cats seems to make me sick.. I can't imagine being in the lane next to you. Do you have any sound clips of your setup?
Originally Posted by NataSS Inc
Why beat it to death when you can do this?
http://www.imagestation.com/album/?id=4287496113
http://www.imagestation.com/album/?id=4287496113
What are you trying do? Trick people? I think the before the axle dumps are just a wee bit quieter.
I have heard the video clip of your car. It's ungodly wicked sounding.I'd imagine it would have to sound like a NEXTEL CUP car on the street
It is absolutely bad ***
Thread Starter
TECH Addict
iTrader: (13)
Joined: Jan 2004
Posts: 2,900
Likes: 1
From: USN, Haze Grey and Underway
Originally Posted by TIMMEH
that looks like Lane's work...could be wrong.
I'd like to see what the rear seats in this car look like now.. I know that people go with mufflers that are 4" thick.. would a 4.5" thick muffler be pushing it?
This is a true dual setup with 4" thick oval mufflers. What do you guys think?
I used 3" Flowmasters. Summit PN FLO-325508. 3"x8"x10" Work great, sound sweet, I have them as dumps, with no floorpan mods and have had 4 adults in the car and it never scraped.
