Pcv system not connected?
Thread Starter
Staging Lane
Joined: Apr 2014
Posts: 51
Likes: 0
From: Austin
Some truck intakes have that fitting on the intake rather than the TB. No room on the DBW TB for it so the option is to plumb between the TB and MAF on the intake tube or tap a fitting on the manifold like I did.
As ro your questions:
1. Yes and no. The air should be filtered and needs to have gone through the MAF.
2. Don't worry, you'll feel vet little suction.
3. Needs to be between TB and MAF
4. Your dipstick will blow out if it builds too much pressure.
As ro your questions:
1. Yes and no. The air should be filtered and needs to have gone through the MAF.
2. Don't worry, you'll feel vet little suction.
3. Needs to be between TB and MAF
4. Your dipstick will blow out if it builds too much pressure.
