Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

5.3l swap issue.

Thread Tools
 
Search this Thread
 
Old 03-12-2015, 04:53 PM
  #1  
Staging Lane
Thread Starter
 
Cole Curtis's Avatar
 
Join Date: Dec 2013
Posts: 64
Received 10 Likes on 8 Posts
Default 5.3l swap issue.

So i've swapped a 006 dbw 25.3l into a third gen camaro. H/C done with no tune yet. I have a scanner hooked up to it. It runs great while cold and pulls hard. o2 sensors fluctuate normally for .1-1.1v. Fuel pressure is a little low at 55 in the rail. But when the ect hits 195 which I believe is when the thermostat opens up and such the o2 sensors stop fluctuating they go to about .07 and .03v and stay there and I can't get the car to move. I haven't tested the fuel pressure when it does this yet might be heat sink for the pump, but it happens everytime I hit 195. No codes thrown or anything. I'm out of any other ideas. Help?



Quick Reply: 5.3l swap issue.



All times are GMT -5. The time now is 01:26 PM.