ses light re: tps
Thread Starter
On The Tree
Joined: Dec 2003
Posts: 163
Likes: 0
From: brighton mich.
ses light re: tps ok guys,I ordered my jantzer ported tb about 3 months ago and for the 2 time now my ses light has came on and both times auto zone has deleted the trottle positioning senser code.any ideas on whats causing it to trip.?can I adjust it or should I just replace it . the guy from auto zone told me its about 20.00 bucks to replace it, but what I want to know is whats causing it. thanks. 
Could be tripping past 4.7v at wot. Open the idle adjustment screw slightly or put a little epoxy or something on the throttle stop, or just slightly bend the throttle shaft where it hits the throttle stop so that is doesn't go quite as far. Obviously it's close, otherwise it would set the code all the time. What's probably happening is that the throttle is opening a touch too far (the throttle shafts vary so it's tough to get the throttle stop perfect all the time).
Scott
Scott
