wayland1985

I was taking photos all along of my disassembly, but evidently they got deleted...

So before I start putting things together, does anybody have any pictures of the wiring harness all plugged in? Most of the connections seem obvious: I just want to be extra sure I get them all correct.

kinglt-1

iTrader: (26)

Here are a few.

wayland1985

Thank you. That should help some!

You keep that engine clean!

kinglt-1

iTrader: (26)

Thanks! I spent a lot of time cleaning when I had it apart. These engines get dirty fast.

conan

iTrader: (5)

See signature, may find some that help.

wayland1985

Does anybody have any good solutions for the unused connectors? I'd rather not cut up the harness...

I could use electrical tape, but I'd rather have something a little more professional looking.

conan

iTrader: (5)

I opened up all the plastic wire loom and pealed back unused plugs all the way to the ECU plug. Then I bundled them up with a zip tie, placed them in a zip lock bag and tucked it under the ECU. Cant see any of them. Then I replaced all the loom and tape to the harness.

Some will un-pin the wires and plugs from the master ECU plugs as well.