***NEW***Texas Speed F-Body cat-back
#201
I did a combo with Texas Speeds 1 7/8" LT there ORY and this new cat back, so It won't be a video with the cat back and the factory manifolds and Y pipe. I used to have an SLP Loudmouth cat back only, and the crazy thing is that my new set up has zero drone and it is pleasent to have a coversation while driving amazed! The cut out makes my car sound like it has a cam lol! I'll post the video wednesday night of before and after with cut out open and closed.
#202
12 Second Club
I'll post pictures of everything bolted up on wednesday for yah. Fit up was great, also if you get your car high enough for the header install they fit no problem, didnt even un-bolt the stearing linkage or remove the oil filter just point collecter at the ground (as TSP suggets) and it went right in. We did remove the passenger coil pack just to help with bolting that header in but otherwise smooth as butter I'm really happy with how it came out and I will say this too I have noticable power gains. I'm going for a dyno tune in a week or so I'll post the numbers after that. oh on a side note the factory bolt that secures the dip stick tube to the block will not fit with these headers, but I used a bench grinder and ground the coller of of it and it went in no problem after that just an fyi.
#203
I'll post pictures of everything bolted up on wednesday for yah. Fit up was great, also if you get your car high enough for the header install they fit no problem, didnt even un-bolt the stearing linkage or remove the oil filter just point collecter at the ground (as TSP suggets) and it went right in. We did remove the passenger coil pack just to help with bolting that header in but otherwise smooth as butter I'm really happy with how it came out and I will say this too I have noticable power gains. I'm going for a dyno tune in a week or so I'll post the numbers after that. oh on a side note the factory bolt that secures the dip stick tube to the block will not fit with these headers, but I used a bench grinder and ground the coller of of it and it went in no problem after that just an fyi.
#209
TECH Resident
I tried to post link, but it does not show up?
https://www.facebook.com/thirdcoastb...66161808828817
https://www.facebook.com/thirdcoastb...66161808828817
#212
Awesome videos guys! Thanks for posting
Lonnie
Lonnie
__________________
NOW OFFERING TSP BY YANK CONVERTERS
COMP - FAST - PACESETTER - WISECO PISTONS - LUNATI - CALLIES - NEW TSP BRAND CRANK & RODS - COMETIC GASKETS
RAM CLUTCHES - MOSER ENGINEERING - ARH HEADERS - ARP - GM BOLTS AND GASKETS - MSD - NGK
POWERBOND - ASP - PRECISION INDUSTRIES - YANK - CIRCLE D - AND MORE!
COMP - FAST - PACESETTER - WISECO PISTONS - LUNATI - CALLIES - NEW TSP BRAND CRANK & RODS - COMETIC GASKETS
RAM CLUTCHES - MOSER ENGINEERING - ARH HEADERS - ARP - GM BOLTS AND GASKETS - MSD - NGK
POWERBOND - ASP - PRECISION INDUSTRIES - YANK - CIRCLE D - AND MORE!
NEW NUMBER (512)863-0900
#213
On The Tree
iTrader: (2)
Join Date: Aug 2012
Location: TN
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
I'm curious what this setup will sound like on a STOCK WS6 that has NO ..... Headers, Cam, etc.
My WS6 is bare bones stock, so i'm curious as to how this Exhaust would sound on my car. Would like to hear it with the Cut-Out open too .... at both Idle and at WOT
My WS6 is bare bones stock, so i'm curious as to how this Exhaust would sound on my car. Would like to hear it with the Cut-Out open too .... at both Idle and at WOT
#216
12 Second Club
Well its loud with the cut-out open, I put her on the dyno yesterday and pulled 350hp/365tq, when I did an open cut out pull it put down 352hp/367tq which will give you an idea of how well this texas speed muffler actually flows, must say they did a great job. Ill post the video tonight..
#217
12 Second Club
Join Date: May 2010
Location: Alexandria, VA
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Love the whole exhaust setup, except for those giant tips. Do you think an option for 3" tips will ever happen for Camaro people? Those massive tips are the only reason I can't commit to buying them.
#218
Does anyone know if the muffler can be bought seperately? Dont have a 4th gen but have a 3rd gen and just put a summit catback on and noticed the box said 4th gen catback. Muffler sounds good on the TSP so wondering if the muffler is sold seperate? Lonnie?
#219
Lonnie
__________________
NOW OFFERING TSP BY YANK CONVERTERS
COMP - FAST - PACESETTER - WISECO PISTONS - LUNATI - CALLIES - NEW TSP BRAND CRANK & RODS - COMETIC GASKETS
RAM CLUTCHES - MOSER ENGINEERING - ARH HEADERS - ARP - GM BOLTS AND GASKETS - MSD - NGK
POWERBOND - ASP - PRECISION INDUSTRIES - YANK - CIRCLE D - AND MORE!
COMP - FAST - PACESETTER - WISECO PISTONS - LUNATI - CALLIES - NEW TSP BRAND CRANK & RODS - COMETIC GASKETS
RAM CLUTCHES - MOSER ENGINEERING - ARH HEADERS - ARP - GM BOLTS AND GASKETS - MSD - NGK
POWERBOND - ASP - PRECISION INDUSTRIES - YANK - CIRCLE D - AND MORE!
NEW NUMBER (512)863-0900