ASP Pully thread pitch and diameter?
Thread Starter
TECH Senior Member
iTrader: (4)
Joined: Nov 2001
Posts: 7,000
Likes: 1
From: Lexington, Ky
ASP Pully thread pitch and diameter? I have to pull of my ASP pulley and it looks like the threads are a bit poor in shape. I want to buy a helicoil in case these threads don't hold.
I hate stuff like this. If threads are this poorly looking before it's put back on the crank, the threads should be repaired before doing so.
I hate stuff like this. If threads are this poorly looking before it's put back on the crank, the threads should be repaired before doing so.
Thread Starter
TECH Senior Member
iTrader: (4)
Joined: Nov 2001
Posts: 7,000
Likes: 1
From: Lexington, Ky
Originally Posted by CANNIBAL
I have to pull of my ASP pulley and it looks like the threads are a bit poor in shape. I want to buy a helicoil in case these threads don't hold.
I hate stuff like this. If threads are this poorly looking before it's put back on the crank, the threads should be repaired before doing so.
I hate stuff like this. If threads are this poorly looking before it's put back on the crank, the threads should be repaired before doing so.
