Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

Missfire issue

Thread Tools
 
Search this Thread
 
Old Sep 20, 2016 | 07:34 PM
  #1  
mitchb727's Avatar
Thread Starter
Registered User
 
Joined: Sep 2016
Posts: 7
Likes: 0
Default Missfire issue

Car miss undriveable when engine is cold When engine reaches operating temp car is drive able with a miss throughout rev range
reeves beautifully Free revving
also manual
List I've done checked
fuel pressure is good at 60psi factory setting (Car runs better when pressure is around 90 psi )
replaced all coils leads and plugs Changed injector rail with known running engine
New fuel pump
changed map sensor out Changed oil pressure switch
coolant temp sensor inew ( 6months )
noticed the issue when got new exhaust system made twin 2.5 With new cars and new 02 sensors I'm stumped Beyond over it haha
Reply
Old Sep 20, 2016 | 11:05 PM
  #2  
pozesd99''s Avatar
TECH Fanatic
iTrader: (3)
 
Joined: Dec 2007
Posts: 1,541
Likes: 0
Default

O2's id bet... Which o2's are you running?
Reply
Old Sep 20, 2016 | 11:48 PM
  #3  
mitchb727's Avatar
Thread Starter
Registered User
 
Joined: Sep 2016
Posts: 7
Likes: 0
Default

Genuine 02 sensors
Reply
Old Sep 22, 2016 | 11:49 AM
  #4  
mintws6's Avatar
12 Second Club
 
Joined: Aug 2014
Posts: 205
Likes: 26
From: Houston, Texas
Default

I would also bet 02 sensors, I have had a brand new pair crap out after 3 weeks
Reply
Old Sep 22, 2016 | 09:00 PM
  #5  
mitchb727's Avatar
Thread Starter
Registered User
 
Joined: Sep 2016
Posts: 7
Likes: 0
Default

fixed swapped out every bloody sensors with a mates ls1 vz commodore found the mas sensor to have tested ok but swapping it out has resolved my issue
Reply




All times are GMT -5. The time now is 05:35 PM.