Turbo build s10
Thread Starter
Teching In
Joined: Jun 2012
Posts: 26
Likes: 0
Turbo build s10 I have a 1990 s10 shorted narrowed rear back half with a 8.8 ford explorer 4.56 gears rear end and a 2003 chevy tahoe 5.3 lm7. So far We have taken apart the engine, Im using the stock crank, callies compstar H rods weipco pistons comp cam 278 285 .605 .598 lift 113 lsa titanium springs and chromoly rods, borg werner 80mm turbo t6, intercooler, arp bolts on heads and main studs. I got 88# fast injectors and a fast fuel rail. Im looking to see what would be the best intake manifold to run to get the best performance. Im going to be running 109 unleaded vp fuel with a tanks gpa-6. I have a ls6 intake available but was looking at the victor jr or the edlebrock high ram? Suggestions
