BBK 80mm vs 78mm ported stock TB?
#1
Teching In
Thread Starter
iTrader: (2)
Join Date: Aug 2004
Location: Toronto
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
BBK 80mm vs 78mm ported stock TB?
I was wondering if I could get input on which route to go. I have a stock 75mm unit, epoxied, WOT stop mod, inlet fully ported, but looking for a little more.
I can get a 78mm reworked stock throttle body off ebay (bored and replated), or find a used BBK unit. Which would everyone recommend and why?
For BBK users, how is throttle tip in off idle compared to stock, is it really sharp? For 98-99 users, how was the feel change with the larger linkage compared to the smaller stock linkage?
And it'd be a big favour if someone with a BBK could post a picture of the linkage on those units, as I need to modify it slightly to work on my car.
Thanks, any advice/help appreciated!
I can get a 78mm reworked stock throttle body off ebay (bored and replated), or find a used BBK unit. Which would everyone recommend and why?
For BBK users, how is throttle tip in off idle compared to stock, is it really sharp? For 98-99 users, how was the feel change with the larger linkage compared to the smaller stock linkage?
And it'd be a big favour if someone with a BBK could post a picture of the linkage on those units, as I need to modify it slightly to work on my car.
Thanks, any advice/help appreciated!