Victors are ordered!
Thread Starter
TECH Enthusiast
iTrader: (-1)
Joined: Feb 2004
Posts: 505
Likes: 0
From: Rochester Hills Michigan
Victors are ordered! Well i broke down today and went to ramchargers, ordered my set of edelbrock victor race headers. No emissions 
They are goin to be painted, no ceramic for me. cost 500 bucks for headers and Y with that merge collector. Im all exciteD anyone have any install tips on these particular headers? what did you have to do to make yours fit?
They are goin to be painted, no ceramic for me. cost 500 bucks for headers and Y with that merge collector. Im all exciteD anyone have any install tips on these particular headers? what did you have to do to make yours fit? yep extremely easy to put in. You'll really like them, they come with 02 extensions, new gaskets, new bolts, AIR/EGR tubes to weld up if you so desire, 02 bungs to weld up wherever you want to, merge slip fit collectors, the works. I got mine back in march when I first heard about them, and they were a breeze to put in.
they sound great behind a Trex cam also with open headers, I clamped a pair of 3.5" moroso spiral flow mufflers to the collectors to quiet things down a tad, I've gotten tons of compliments about how my car sounds, mostly from old school sbc/bbc car guys that had no idea you could get an LS1 to sound like that
they sound great behind a Trex cam also with open headers, I clamped a pair of 3.5" moroso spiral flow mufflers to the collectors to quiet things down a tad, I've gotten tons of compliments about how my car sounds, mostly from old school sbc/bbc car guys that had no idea you could get an LS1 to sound like that
Great headers! As said before, sound WICKED behind a T-rex. I have mine hooked up to the Ed y-pipe made for these and a Hooker catback, sounds AWESOME!
As for install, wait til after the headers are in to put on the collectors.
As for install, wait til after the headers are in to put on the collectors.
Trending Topics
Originally Posted by xssive
Are the o2 extensions premade? or do you have to cut your o2's and splice...?
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'
Brett Foote
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
The paint that comes on them will burn off on first startup, like all headers. I thought about getting them Jet Hot'ed, but everyone said with longtubes, it just comes off anyway, as will paint. So I just threw mine on. Collectors are still black, but the headers are grey now.
I had Jet Hot on my shorty headers and y-pipe on my IROC. It stayed on the headers for years, but the y-pipe was rusted after awhile. I think it's just the nature of the beast. I just couldn't see spending $350+ on coating that was going to come off soon on LT's anyway.
I had Jet Hot on my shorty headers and y-pipe on my IROC. It stayed on the headers for years, but the y-pipe was rusted after awhile. I think it's just the nature of the beast. I just couldn't see spending $350+ on coating that was going to come off soon on LT's anyway.
