Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

Who is running NGK TR6 plugs?

Thread Tools
 
Search this Thread
 
Old 09-21-2004 | 11:30 AM
  #21  
Juiced's Avatar
TECH Fanatic
iTrader: (2)
 
Joined: Sep 2004
Posts: 1,138
Likes: 0
From: Kalifornia
Default

I was running them back wheni was spraying they only lasted about 10k miles. but they has about 900-1000 miles worth of nitrous on them
Old 10-12-2004 | 09:41 PM
  #22  
JimMueller's Avatar
TECH Junkie
iTrader: (9)
 
Joined: Jan 2002
Posts: 3,995
Likes: 61
From: Casselberry FL
Default

This thread is a bit old, but I just checked my TR6's installed last Easter. Someone else installed the plugs, but I'm pretty sure they weren't gapped. If they were, then ???

Anyway, the gaps ranged from .03-.055 after about 9000 miles. I re-gapped them to .035 and re-installed them.
Old 10-16-2004 | 02:14 PM
  #23  
daryl2cb@yahoo.com's Avatar
TECH Fanatic
iTrader: (2)
 
Joined: Jul 2004
Posts: 1,882
Likes: 0
From: Greensburg,PA
Default

tr 6's gapped at .038 spraying 150 shot, no problems, even fixed the rough idle on the tr55's?
Old 10-16-2004 | 02:28 PM
  #24  
ohhiitznik's Avatar
TECH Enthusiast
iTrader: (-1)
 
Joined: Feb 2004
Posts: 505
Likes: 0
From: Rochester Hills Michigan
Default

I just put mine in, they improved my gas mileage, made my car run better, idle better and more power. I went from stock to TR6's as i plan to spray a 100 shot in the future. Mods are just Lid/PPTB/LS6/EdelbrockLT's/ORY/Hookercatback and she runs like a champ



Quick Reply: Who is running NGK TR6 plugs?



All times are GMT -5. The time now is 07:00 PM.